This is a custom LED signage built with Black Acrylic cutout in the front. Hence, even without turning on the LEDs, this is an amazing standalone display due to its natural sheen. You can also opt-in to go with silver brush aluminum or gold brush aluminum composite face depending on your specific design. We fabricate and ship from our California workshop so rest assured we can deliver your signage on time.
Application:
This Product Includes:
- LED Sign
- AC/DC Power Plug (45-Inch cable length)
- Mounting Template
- Mounting Studs
For best lighting results, we recommend installing your sign on a white background. Any other color will be reflected back to the sign.
Installation Instruction:
1. Tape Mounting Template to the desire sign location.
2. Trace mounting holes hard enough so you can see them on the wall after removing the Mounting Template.
3. Remove Mounting Template and drill into your wall.
4. Lightly fill your drilled holes with silicone for extra security.
5. Insert Stainless Steel Studs into the back of your LED Sign.
6. Insert LED Sign into the wall. Make sure the sign is lifted as little as possible with LED evenly lit on the entire display. Depending on your displays, they should be lifted approximately 2.5 inches off the wall.
7. Plug in your AC/DC Adaptor and you are ready to go! (Please consult with an electrician if you want to hide wiring behind the wall.)
